

















VAT included Shipping costs will be calculated at checkout
Mast tower & accessories for wind generators from IstaBreeze®
Simple installation:
Installing a wind generator has never been so easy! With the IstaBreeze® Tower, you can set up your wind generator in just a few minutes. The innovative folding system simplifies the entire process. During maintenance work, only a few screws need to be loosened and the tower can be easily folded up for maintenance. In addition, the mast can be extended by a maximum of 2 meters and must be secured with wire ropes.
Depending on your selection, you will receive:
IstaBreeze® Tower and Vibration Dampers for Wind Generators
- 15 kg or 40 kg tower with 4 meters length
- 15 kg or 40 kg extension bar: 1 meter (corresponds to quantity 1)
Vibration Dampener:
The vibration damper is compatible with the wind generators i-500, L-500 and i-700 to i-2000. It reduces the transmission of structure-borne noise from the wind generator to the mast and thus potentially also to the house. Retrofitting is extremely easy, as the structure-borne noise damper has the same dimensions as the wind generator. It simply needs to be inserted between them and attached to the mast and wind generator with suitable screws. Note: Not compatible with WindSafe models.
Note: If desired, the tower and the damper can also be adapted to another wind generator instead of IstaBreeze.

PRODUCT FEATURES TOWER 15KG | DETAILS |
---|---|
TOWER | (15 kg) load capacity |
CONNECTING ELEMENTS | 3 piece rope tensioning and screw set |
STEEL CABLE | 3 5 x m |
TOWER BARS | 4 pieces of hot-dip galvanized rods |
OUTER DIAMETER | 42 XNUMX mm |
INNER DIAMETER | 37 XNUMX mm |
PACKAGING DIMENSIONS | 100 x 25 x 20 cm (21 kg) |
PLATE | 1 piece of hot-dip galvanized joint plate |
LENGTH | 4 m |
BAR WALL THICKNESSES | 3 XNUMX mm |
NOTE: | With 15 kg extension parts, the tower can be extended as desired. |
PRODUCT FEATURES Tower 40KG |
DETAILS |
---|---|
TOWER SET | (40 kg) load capacity |
CONNECTING ELEMENTS | 3 piece rope tensioning and screw set |
STEEL CABLE | 3 5 x m |
TOWER | 4 pieces of hot-dip galvanized rods |
OUTER DIAMETER | 60 XNUMX mm |
INNER DIAMETER | 37 XNUMX mm |
PACKAGING DIMENSIONS | 100 x 25 x 20 cm (27 kg) |
PLATE | 1 piece of hot-dip galvanized joint plate |
LENGTH | 4 m |
BAR WALL THICKNESSES | 3 XNUMX mm |
NOTE: | With 40 kg extension parts, the tower can be extended as desired. |
Select options

















