This wind / solar hybrid charge controller 650 from IstaBreeze® is for the parallel use of 3-phase generators (AC) up to max. 500 watts and 2-phase photovoltaic modules (DC) up to max. 150 watts suitable.
- Available in: 12 volts or 24 volts
- Microchip controlled
- aluminum housing
- LEDs for display: charging / battery connected / battery full
- Regulation of the charging process to protect the battery against overcharging
- Braking the wind generator when the wind speeds are too high
|
Nominal battery voltage |
12 volt | 24 volt |
|
Maximum input power wind turbine |
500 watts, | 500 watts, |
|
Maximum input power PV module |
150 watts, | 150 watts, |
|
Maximum charging voltage |
14,9 volt | 29,0 volt |
|
Maximum charging current amp wind |
35 amps | 18 amps |
|
Battery voltage minimum |
9,0 volt | 18,0 volt |
|
Brake function (mechanical short circuit, wind turbine is short-circuited by a relay when the battery is full until it comes to a complete standstill.) |
From 14,9 volts |
From 29,6 volts |
|
Protection against deep discharge of the battery |
none | none |
|
Protection against incorrect polarity reversal (+/-) |
none | none |
|
Dimensions LxWxH |
150 x 150 x 60 mm |
150 x 150 x 60 mm |
|
Weight |
0,5 kg. | 0,5 kg. |
| Recommended battery | Gel | Gel |
