2000W 48V 3-phase AC wind power inverter with limiter sensor + dump load VDE – direct connection to 220 volts

AC wind power grid feed-in inverter with limiter sensor + dump load VDE  

Harness the power of wind energy with our 2000W 48V 3-phase wind power grid feed-in inverter. Equipped with a limiter sensor and a dump load controller, this inverter ensures safe and efficient feed-in to the public grid. Ideal for wind turbines, it enables optimal use of the energy generated and protects against overload. Benefit from easy installation, high efficiency and reliable operation, approved according to VDE standards..

We call a system consisting of a grid-connected inverter and a wind turbine "SGWT". The small grid-connected inverter for wind power can capture the wind energy from wind turbines and feed it into the grid via its output cables without any additional equipment. Plug and play.

The inverter can be connected to any socket on the home's power grid. The small grid feed inverter monitors the volume, frequency and phase of the home's power grid and produces a clean sinusoidal AC output whose frequency and phase match the grid. The small grid feed inverter supplies power when the home grid is active. When the AC wind turbine is rotating and its output voltage is within the range of the inverter's rated voltage, the wind turbine generates energy and the grid feed inverter converts the energy from the wind turbine for the home grid. If the total power of the electrical appliances in the house is greater than the inverter's output power, the inverter's energy will be consumed in the house. This slows down the electricity meter; otherwise, the difference between the inverter's output power and the total power of the appliances will be dumped into the public grid.

NOTE: Any DC power inputs are prohibited.

Advantages of the inverter:

1. Direct connection to three-phase wind turbine (48V AC wind generator)
2. Plug and play, easy to install.
3. Can be connected in parallel on the AC side.
4. Built-in dump load controller.
5. Supports WiFi communication. (Additional WiFi module needs to be purchased)
6. Each inverter must pass two tests (20 hours) before leaving the factory.
7. Overload protection, island protection, short circuit protection / reverse polarity protection.
8. Wind turbine voltage range: AC25,9V ~ 51,96V.
9. 2 year warranty, lifetime technical support.

How to choose the right output voltage of wind AC?

You can calculate the DC voltage from the 3 phases of the AC output voltage of the wind turbine. The formula is: ( V_{AC} = \frac{V_{DC}}{1,732} ). For example, if the DC input voltage range of the inverter is 45~90V, then the AC output range of the wind turbine should be 45/1,732 ~ 90/1,732 = AC25,9V ~ 51,96V.

Built-in dump load controller:

This model of grid feed-in is designed for wind turbines that generate three-phase AC voltage. It can maintain the speed of the wind turbine and keep the voltage from the wind turbine always within the rated range of the grid feed-in inverter. It also has a high voltage protection function; when the wind is too strong and the dump load control system cannot maintain the output voltage of the wind turbine, the controller will disconnect from the wind turbine, which makes it very safe to use.

Technical data:

Note: The WLAN module is not included in delivery, please purchase separately.

You also benefit from our excellent customer service, which is available to answer any questions you may have. Installation is straightforward and we offer suitable towers in our shop to make installation easier