



VAT included Shipping costs will be calculated at checkout
Wind generator IstaBreeze® Heli 4.0 Selection off-grid or ON-grid
The Heli Wind Turbine is a wind generator that is ideal for inland locations. Depending on the selection, it is specially designed for battery charging from 48 volts or on-grid grid feed-in.
An azimuth bearing is only additionally installed in our helicopter model, the bearing is designed as a double-bearing plain bearing and is equipped with grease nipples for relubrication.
The repeller blades and nacelle cover are manufactured and painted using the hand lamination process.
Technical data off-grid
| Generator |
3-phase three-phase current permanent magnet (high efficiency thanks to strong permanent magnets (NdFeBo magnets, 150 ° temperature resistant) weight 31 kg. |
| battery voltage | 48 volt |
| rated capacity | 3,8 kW with 11 m / s wind |
| Maximum performance | 7,4 kW |
| Loading area | 0 - 600RPM |
| Switch-on speed | 2,9 m / s |
| Automatic storm protection | 13 m / s (by tilting the rotor) |
| Manual storm protection | (Optional) when selecting with charge controller |
| Supporting structure | Steel powder coated |
| Power transmission | Slip ring, therefore no twisting of the cable possible. (pre-assembled in the carrying element |
| Rotor blades | GRP hand laminated & painted white |
| Weight | approx. 2700 g (per sheet) |
| Rotor diameter | 300 cm |
| volume | 30 db |
| Total weight of the wind generator | 100 kg |
ON-Grid wind generator:
| TECHNICAL DATA | DETAILS |
|---|---|
| Generator type | Permanent magnet rotor, brushless, gearless, maintenance-free |
| Magnets | Extremely strong NdFeBo permanent magnets, temperature resistant up to 150 °C |
| Warehouse | Special ball bearings for radial and axial forces |
| Current Type | three-phase current |
| Rectifier | Separate |
| direction of rotation | Both directions of rotation possible |
| tension | 0-1000 VDC power supply |
| start of feed-in | By about 100 rpm |
| Performance | 3700 watts at 420 rpm and 400 VDC |
| Performance curve | Evenly increasing |
| Housing | aluminum housing with surface cooling |
| nacelle housing | GRP (glass fiber reinforced plastic) |
| Class | IP56 |
| Property | Details |
|---|---|
| minimum battery voltage | 42 V |
| Cables | 10 mm² screw terminals |
| charging current wind ampere max. | 70 A |
| Charging voltage | 52,8 V |
| Cooling | External aluminum cooling fins |
| Advertising | LCD with 3 displays: Ampere, Watt, Battery Voltage |
| Dump load | 4,0 KW braking resistor (load resistance may vary) |
| Integrated manual stop switch | Maintenance |
| Class | IP20 (indoor) |
| Nominal battery voltage | 48 VDC |
| Max. input power of the wind turbine | Nominal: 4 KW, Max: 5 KW |
| brake function | Electromagnetic short circuit from 58V; automatic brake at cooling temperature ≥ 50°C |
| brake function | 3 dump loads (resistance), each active for 5 seconds |
| Operating temperature | Normal: 20+55°C/35-85% RH, Industrial: 30+55°C/35-85% RH |
| Temperature compensation | -4 mV/°C/2V, -35°C to +80°C, Accuracy: ±1°C |
| Recommended battery | Min. Acid & Gel (can be adjusted by our technician for lithium batteries) |
Select options






