Product description:
Wind/Charge Controller for IstaBreeze® is an intelligent controller for the windmill and styrer on the same page. The advance can also be achieved through bridges and overworking systems. The bridge is at the top of the charger and styre, the battery is safe and effective with wind generators.
Med sit discrete udseende, lette betjening og integrerede beskyttelsesfunktioner har dene enhed høj effectiveitet og lave belastningstab. The version of the controller is also powered and stabilized by the system, and is battery powered.
The overloaded styreelektronikken and styreskabet netspændingen and brakes windmills, only a maximum overspænding nås.
The relevant function and product information is required for:
Brug af eksterne and højkvalitets (Triacs & Hyper Mosfet) solid state components. Forlængelse a controllerens levetid.
Microprocessor system operating with integrated speed and current flow.
Electromagnetic brake control.
Integrerede 3-fasede kortslutningsafbrydere (brake contactor)
Beskyttelse mod lynnedslag.
Beskyttelse mod overopladning, dynamic afladning, kortslutning, overbelastning and forkert polaritetsvending.
Integrated display.
Generators brake automatically, without battery power, modern brake system with extra loading (dump load) for at undgå øjeblikkelig blokering on turbines. Forøgelse a stators levetid.
LCD and controllers.
- Minimum battery voltage: 42V
- Cable: 10 kvmm skrueterminaler
- Maximum charging current: 70 A
- Charging voltage: 52,8V
- Køling: Udvendige køleribber aluminium
- Display: LCD with 3 displays ampere, watt, battery voltage
Dumpebelastning: 4,0 KW brake modstand Belastningsmodstanden can be seen from illustrations. - Integreret manuel stop contact: vedligeholdelse
- Beskyttelsesclass: IP20 (indendørs område)
- Nominal battery voltage: 48 VDC
- Maximum input effect for windmill Nominel: 4 KW Max: 5 KW
- Brake function: (electromagnetic kortslutning, ) fra 58V. Hvis
- When the temperature is below 50 °C or less, the automatic brake is activated.
- Brake function: The he 3 dumpbelastninger (modstand). It is active for 5 seconds. The first dump loading is active for 5 seconds. The other 5 seconds he the other dump loading active. After 5 seconds, the dump load will be active.
- Drift temperature: Normal: 20~+55°C/35~85% RH Industrial: 30~+55°C/35~85% RH
- Temperature compensation: -4mV°C/2V, -35°C-- +80°C, rated: ±1°C
- Battery pack: Min. Syre & Gel