|
Detailer for 2000W Pro Wind Charge Controller Controller |
|
| Batterispænding min | 42V |
| Cables |
10 mm (batteri) 6 mm (Vindmølle and dumpload) 4 mm (jord) |
| Charging current amps | 40A |
| loading spænding | 52,8V |
| afkøling |
Used cooler in aluminum |
| Screen: | LCD with 3 voltages: ampere, watt, battery voltage, brake, temperature |
| Dump loading | 2 kW brake modstand, loading modstand |
| Integrated manual stop contact | until vedligeholdelse |
| Protection class | IP20 indeni |
| Batteriets nominal spænding | 48VDC |
| Maximum industrial effect for windmills | 2,2kw |
| Brake function (elektromagnetisk kortslutning). | Fra 58V. If the temperature is below 50°C, the automatic brake will be activated |
| operating temperature | Normal: 20~+55°C/35~85%RH Industriel: 30~+55°C/35~85%RH |
| Temperature compensation | -4mV°C/2V, -35°C-- +80°C, rated: ±1°C |
| Battery included |
Syre and gel (can be used with lithium battery, can be used in the light, available) |
| Detailer for 1500W Pro Wind Charge Controller Controller | ||
| Batterispænding min | 21V | |
| Cables |
10 mm (batteri) 6 mm (vindmølle and tiplast) 4 mm (jord) | |
| Charging current ampere | 60A | |
| loading spænding | 25,2V | |
| afkøling | Used cooler in aluminum | |
| Screen: | LCD with 3 voltages: ampere, watt, battery voltage, brake, temperature | |
| Dump loading |
|
|
| Integrated manual stop contact | until vedligeholdelse |
|
| Batteriets nominal spænding | 24VDC | |
| Maximum industrial effect for windmills | 1,6 kw | |
| Brake function (elektromagnetisk kortslutning). | Fra 28,8V. If the temperature is below 50°C, the automatic brake will be activated. Fra 28,8V. The temperature is below 50°C or less, until the automatic brake is active. | |
| operating temperature | Normal: 20~+55°C/35~85%RH Industriel: 30~+55°C/35~85%RH | |
| Battery included | Syre and gel (can be used with lithium battery, can be used in the light, available) | |
Sådan gør du instructioner -24V
Sådan gør you instruction 2000-48V